Yamaha Tenere 700 Prefilter
They save time, money and heartache.
Most Adventure bikes aren't designed for Australia's dusty conditions.
Add extra protection and easy of service with a prefilter.
They can be changed, cleaned and replaced in a fraction of the time of the main unit.
Supplied pre-oiled and ready to go, simply fit over the end of the inlet snorkel.
Held in place by a supplied re-usable zip tie.
Effective way to trap dirt before hitting the main filter, in a location that's quick and easy to change on the road.
Spare pre-filter foams can be carried in your bumbag or back pack to be quickly and easily swapped on very dusty rides after just removing the seat.
This is advice from Unifilter
· When refitting the lid of the air box, seal it with a coating of high temperature bearing grease.
· When fixing the air box lid screws, screw all four down evenly, then tighten them snug, to ensure the air box lid seats squarely.
· The bottom end of the snorkel inside the air box can be trimmed by 12mm to allow improved dust spread around the filter element, rather than concentrating dust on the very bottom of the element.
